Die EU-Verordnung für In-vitro-Diagnostika (IVDR) in der Praxis: Umsetzung und Anwendung - Ergebnisse einer öffentlichen Veranstaltung der Arbeitsgemeinschaft der Wissenschaftlichen Medizinischen Fachgesellschaften (AWMF) im März 2023.

In order to discuss first experiences with the implementation of the EU Regulation on In Vitro Diagnostic Medical Devices (IVDR) about one year after its entry into force, the German Association of the Scientific Medical Societies (AWMF e.V.) organized a full-day public webinar. Overall, it became clear that the implementation of the IVDR still poses significant challenges for laboratory medicine and pathology. Corrections at the political level and implementation with a sense of proportion are required. Before the long-term goal of the IVDR, i.e. the increase in patient safety, can be realized, the prevention of disadvantages for patients due to gaps in care must be strived for in the medium term by all parties involved.

Report from the HarmoSter study: different LC-MS/MS androstenedione, DHEAS and testosterone methods compare well; however, unifying calibration is a double-edged sword.

OBJECTIVES: Current LC-MS/MS applications for circulating androgen measurements are technically diverse. Previously, variable results have been reported for testosterone. Data are scarce for androstenedione and absent for DHEAS. We assessed the agreement of androstenedione, DHEAS and testosterone LC-MS/MS measurements among nine European centers and explored benefits of calibration system unification. METHODS: Androgens were measured twice by laboratory-specific procedures in 78 patient samples and in EQA materials. Results were obtained by in-house and external calibration. Intra- and inter-laboratory performances were valued. RESULTS: Intra-laboratory CVs ranged between 4.2-13.2 % for androstenedione, 1.6-10.8 % for DHEAS, and 4.3-8.7 % and 2.6-7.1 % for female and male testosterone, respectively. Bias and trueness in EQA materials were within ±20 %. Median inter-laboratory CV with in-house vs. external calibration were 12.0 vs. 9.6 % for androstenedione (p<0.001), 7.2 vs. 4.9 % for DHEAS (p<0.001), 6.4 vs. 7.6 % for female testosterone (p<0.001) and 6.8 and 7.4 % for male testosterone (p=0.111). Median bias vs. all laboratory median with in-house and external calibration were -13.3 to 20.5 % and -4.9 to 18.7 % for androstenedione, -10.9 to 4.8 % and -3.4 to 3.5 % for DHEAS, -2.7 to 6.5 % and -11.3 to 6.6 % for testosterone in females, and -7.0 to 8.5 % and -7.5 to 11.8 % for testosterone in males, respectively. CONCLUSIONS: Methods showed high intra-laboratory precision but variable bias and trueness. Inter-laboratory agreement was remarkably good. Calibration system unification improved agreement in androstenedione and DHEAS, but not in testosterone measurements. Multiple components, such as commutability of calibrators and EQA materials and internal standard choices, likely contribute to inter-laboratory variability.

Regulation (EU) 2017/746 (IVDR): practical implementation of annex I in pathology.

BACKGROUND: Regulation (EU) 2017/746 on in vitro diagnostic medical devices (IVDR) imposes several conditions on pathology departments that develop and use in-house in vitro diagnostic medical devices (IH-IVDs). However, not all of these conditions need to be implemented immediately after the IVDR entered into force on 26 May 2022. Based on an amending regulation of the European Parliament and the Council of the European Union, the requirements for IH-IVDs will be phased in. Conformity with the essential safety and performance requirements of annex I must be ensured from May 2022. OBJECTIVES: With this article, we would like to present the practical implementation of the currently valid conditions for IH-IVDs at the Institute of Pathology at the University Hospital of Heidelberg, in order to provide possible assistance to other institutions. CONCLUSIONS: In addition to the intensive work on the requirements for IH-IVDs, several guidance documents and handouts provide orientation for the implementation and harmonisation of the requirements for healthcare institutions mentioned in Article 5 (5). Exchange in academic network structures is also of great importance for the interpretation and practical implementation of the IVDR. For university and nonuniversity institutions, ensuring conformity with the IVDR represents a further challenge in terms of personnel and time, in addition to the essential tasks of patient care, teaching and research and the further development of methods for optimal and targeted diagnostics, as well as the maintenance of the constantly evolving quality management system.

Extracorporeal adsorption of protective and toxic bile acids and bilirubin in patients with cholestatic liver dysfunction: a prospective study.

BACKGROUND: The release of toxic bile acids (BAs) in the blood of critically ill patients with cholestatic liver dysfunction might lead to the damage of various organs. Their extracorporeal elimination using the cytokine adsorber Cytosorb® (CS) (adsorption of especially hydrophobic molecules < 60 kDa) might be promising, but data proving a potential adsorption are missing so far. METHODS: The prospective Cyto-SOVLE study (NCT04913298) included 20 intensive care patients with cholestatic liver dysfunction, continuous kidney replacement therapy, total bilirubin concentration > 10 mg/dl and the application of CS into the dialysis circuit. Bilirubin and different BAs were measured pre- and post-CS at defined timepoints (10 min, 1, 3, 6, and 12 h after initiation). Relative reduction (RR, %) was calculated with: [Formula: see text]. RESULTS: The median RR for total and conjugated bilirubin after initiation was - 31.8% and - 30.3%, respectively, and decreased to - 4.5% and - 4.8% after 6 h. A high initial RR was observed for the toxic BAs GCA (- 97.4%), TCA (- 94.9%), GCDCA (- 82.5%), and TCDCA (- 86.0%), decreasing after 6 h to - 32.9%, - 32.7%, - 12.8%, and - 14.3%, respectively. The protective hydrophilic BAs showed a comparable RR after initiation (UDCA: - 77.7%, GUDCA: - 83.0%, TUDCA: - 91.3%) dropping after 6 h to - 7.4%, - 8.5%, and - 12.5%, respectively. CONCLUSIONS: Cytosorb® can adsorb bilirubin and toxic as well as protective BAs. However, a fast saturation of the adsorber resulting in a rapid decrease of the RR was observed. Furthermore, no relevant difference between hydrophobic toxic and hydrophilic protective BAs was detected regarding the adsorption amount. The clinical benefit or harm of the BA adsorption needs to be evaluated in the future.

[Regulation (EU) 2017/746 (IVDR): practical implementation of annex I in pathology]. / Die Verordnung (EU) 2017/746 (IVDR) in der Praxis: Umsetzung von Anhang I in der Pathologie.

BACKGROUND: Regulation (EU) 2017/746 on in vitro diagnostic medical devices (IVDR) imposes several conditions on pathology institutes that develop and use in-house in vitro diagnostic medical devices (IH-IVDs). However, not all of these conditions need to be implemented immediately after the IVDR entered into force on 26 May 2022. Based on an amending regulation of the European Parliament and the Council of the European Union, the requirements for IH-IVDs will be phased in. Conformity with the essential safety and performance requirements of annex I must be ensured from May 2022. OBJECTIVES: With this article, we would like to present the practical implementation of the currently valid conditions for IH-IVDs at the Institute of Pathology at the University Hospital of Heidelberg, in order to provide possible assistance to other institutions. CONCLUSIONS: In addition to the intensive work on the requirements for IH-IVDs, several guidance documents and handouts provide orientation for the implementation and harmonisation of the requirements for healthcare institutions mentioned in Article 5 (5). Exchange in academic network structures is also of great importance for the interpretation and practical implementation of the IVDR. For university and nonuniversity institutions, ensuring conformity with the IVDR represents a further challenge in terms of personnel and time, in addition to the essential tasks of patient care, teaching and research and the further development of methods for optimal and targeted diagnostics, as well as the maintenance of the constantly evolving quality management system.

A suggested protocol for value assignment using isotope-dilution-LC-MS/MS in reference measurement procedures - Exemplary application for ciprofloxacin in serum.

BACKGROUND: Reference measurement procedures for assigning values to calibration materials play a crucial role in the concept of metrological traceability in laboratory medicine. ISO standard 15,193 specifies the requirements for such measurement procedures, albeit in a very general terms. MATERIALS AND METHODS: A standard structure of analysis series for value assignment by LC-MS/MS was developed and tested,this structure was complemented by a spreadsheet file for result calculation, metadata evaluation, and finally validation and confirmation of individual analysis runs and individual results, and measurement uncertainty evaluation. This framework was applied to a procedure for the quantification of ciprofloxacin in serum as an example. RESULTS: The approach of a detailed description of the analytical procedures of isotope dilution LC-MS/MS reference measurement methods together with a highly standardized spreadsheet-based method for data processing was found to be practical and efficient. The described measurement procedure for the quantification of ciprofloxacin in serum was found to be fit for purpose. CONCLUSION: A standardized, detailed procedure for the application of isotope dilution LC-MS/MS in reference measurement procedures can complement the ISO 15193 standard with respect to this particular analytical technique, which is now widely used in the context of metrological traceability in laboratory medicine.

Non-Invasive Zinc Protoporphyrin Screening Offers Opportunities for Secondary Prevention of Iron Deficiency in Blood Donors.

Background: Frequent blood donors are at high risk of developing iron deficiency. Currently, there is no potent screening during blood donation to detect iron deficient erythropoiesis (IDE) before anemia develops and deferral from donation is inevitable. Study Design and Methods: In addition to capillary and venous hemoglobin, the iron status of 99 frequent blood donors was assessed by various venous blood parameters and zinc protoporphyrin IX (ZnPP). ZnPP was determined by high-performance liquid chromatography (HPLC) and a new prototype fiber-optic device was employed for non-invasive measurements of ZnPP through the blood collection tubing (NI-tubing) and on lip tissue (NI-lip). We aimed to evaluate the feasibility and diagnostic value of the NI-tubing measurement for early detection of severe iron deficiency in blood donors. Results: NI-tubing and HPLC reference measurements of ZnPP showed narrow limits of agreement of 12.2 µmol ZnPP/mol heme and very high correlation (Spearman's Rho = 0.938). Using a cutoff of 65 µmol ZnPP/mol heme, NI-tubing measurements (n = 93) identified 100% of donors with iron deficiency anemia (IDA) and an additional 38% of donors with IDE. Accordingly, NI-tubing measurements would allow detection and selective protection of particularly vulnerable donors. Conclusion: NI-tubing measurements are an accurate and simple method to implement ZnPP determination into the routine blood donation process. ZnPP was able to identify the majority of subjects with IDE and IDA and might therefore be a valuable tool to provide qualified information to donors about dietary measures and adjustments of the donation interval and thereby help to prevent IDA and hemoglobin deferral in the future.

Competence-based catalog of learning objectives for the subject area of quality management in medical studies - position paper of the working group Quality Management in Education, Training and Continuing Education of the Society for Quality Management in Health Care (GQMG).

Background: Traditionally, direct medical competences are taught in medical studies, whereas leadership and quality management competences are hardly taught, although graduates are already confronted with management tasks at the beginning of their clinical work. With the upcoming amendment of the Medical Licensing Regulations, this topic area will probably be addressed and must be adequately taught by the faculties. The learning objectives in the area of quality management listed in the current working version of the German National Catalogue of Learning Objectives in Medicine (NKLM) 2.0 have so far been formulated in rather general terms and need to be concretized. Aim: To develop a competence-based learning objectives catalog for the topic area of quality management in medical studies as a structured framework recommendation for the design of faculty teaching-learning programs and as a suggestion for further development of the NKLM. Methods: The competence-based learning objectives catalog was developed by an eight-member working group "Quality Management in Education, Training and Continuing Education" of the Gesellschaft für Qualitätsmanagement in der Gesundheitsversorgung e.V. (GQMG) within the framework of a critical synthesis of central publications. The members of the project group have many years of project experience in quality management in health care as well as in university didactics. Results: Six basic competence goals as well as 10 specific competence goals could be formulated and consented upon. These are each flanked by a list of essential basic concepts and examples. These focus on quality improvements, including patient safety and treatment success against the background of a physician leadership role in an interprofessional context. Discussion: A competency-based set of learning objectives has been compiled that encompasses the necessary concepts and basic knowledge of quality management required for those entering the profession to understand and actively participate in quality management after completing medical school. To the authors' knowledge, no comparable learning objectives catalog is currently available for medical studies, even internationally.

Rules for mass spectrometry applications in the clinical laboratory.

MS-based analytical methods now play an important role in medical laboratory analysis. Predominantly triple-stage mass spectrometry is used for the quantification of small molecule biomarkers and xenobiotics in blood and urine. The spectrum of applications ranges from completely in-house developed analytical methods, to industrially manufactured kit solutions used on generic equipment, to the first closed MS-based analysis systems. It is to be expected that the weights will shift in the coming years. Thus, operation and evaluation for most applications will remain very challenging and very different from the far more user-friendly and fully automated systems - mainly photometry-based - which are commonly used in clinical laboratories. General regulatory requirements for medical analysis differ significantly between countries globally. General requirements for in-house developed assay methods are valid in some countries, but concrete and methodology-specific rules for operation and quantification when using MS methods in the medical diagnostic laboratory are not applied. This differs significantly from other bio-analytical areas such as food monitoring, pharmaceutical research, or forensics, where legally binding, detailed rules exist in some cases, e.g., for substance identification. Internationally used relevant and helpful general standards with regard to mass spectrometric examination procedures in the clinical laboratory are in particular CLSI 62A and ISO 15189, while the IVDR in the EU primarily regulates the manufacture of diagnostic articles and not their application. In addition, from many years of application experience, some general advice can be recommended as rules that can contribute to robustness and patient safety in the clinical application of MS procedures; with emphasis on: reasonable method description, batch release, competence management, maintenance, and continuity management. This article also proposes some procedural basic requirements for the application of MS procedures in the clinical laboratory.

Structure and content of the EU-IVDR : Current status and implications for pathology.

BACKGROUND: Regulation (EU) 2017/746 on in vitro diagnostic medical devices (IVDR) was passed by the European Parliament and the Council of the European Union on 5 April 2017 and came into force on 26 May 2017. A new amending regulation, which introduces a phased implementation of the IVDR with new transitional provisions for certain in vitro diagnostic medical devices (IVDs) and a later date of application of some requirements for in-house devices for healthcare facilities, was adopted on 15 December 2021. The combined use of CE-certified IVDs (CE-IVDs), in-house IVDs (IH-IVDs), and research use only (RUO) devices are a cornerstone of diagnostics in pathology departments and crucial for optimal patient care. The IVDR not only regulates the manufacture and placement on the market of industrially manufactured IVDs, but also imposes conditions on the manufacture and use of IH-IVDs for internal use by healthcare facilities. OBJECTIVES: Our work provides an overview of the background and structure of the IVDR and identifies core areas that need to be interpreted and fleshed out in the context of the legal framework as well as expert knowledge. CONCLUSIONS: The gaps and ambiguities in the IVDR crucially require the expertise of professional societies, alliances, and individual stakeholders to successfully facilitate the implementation and use of the IVDR in pathology departments and to avoid aberrant developments.

Semi-automated serum steroid profiling with tandem mass spectrometry.

Objectives: Highly selective and sensitive multi-analyte methods for the analysis of steroids are attractive for the diagnosis of endocrine diseases. Commercially available kits are increasingly used for this purpose. These methods involve laborious solid phase extraction, and the respective panels of target analytes are incomplete. We wanted to investigate whether an improvement of kit solutions is possible by introducing automated on-line solid phase extraction (SPE) and combining originally separate analyte panels. Methods: Sample preparation was performed using automated on-line SPE on a high-pressure stable extraction column. Chromatographic separation, including isobaric compounds, was achieved using a 0.25 mM ammonium fluoride-methanol gradient on a small particle size biphenyl column. Standard compounds and internal standard mixtures of two panels of a commercially available kit were combined to achieve an optimized and straightforward detection of 15 endogenous steroids. Validation was performed according to the European Medicines Agency (EMA) guidelines with slight modifications. Results: Validation was successfully performed for all steroids over a clinically relevant calibration range. Deviations of intra- and inter-assay accuracy and precision results passed the criteria and no relevant matrix effects were detected due to highly effective sample preparation. External quality assessment samples showed the applicability as a routine diagnostic method, which was affirmed by the analyses of anonymized clinical samples. Conclusions: It was found possible to complement a commercially available kit for quantitative serum steroid profiling based on isotope dilution LC-MS/MS by implementing automated on-line SPE, thereby improving the practicality and robustness of the measurement procedure.

Therapeutic drug monitoring in breast cancer therapy - LC-MS/MS method for quantification of the CDK4/6 inhibitors abemaciclib, palbociclib, ribociclib, and major metabolites abemaciclib M20 and M2 in human serum.

The cyclin-dependent kinase 4 and 6 (CDK4/6) inhibitors palbociclib, ribociclib, and abemaciclib were approved by the U.S. Food and Drug Administration (FDA) and European Medicine Agency for the treatment of breast cancer between 2015 and 2018. Oral tumor therapeutics extend the options for cancer therapy, but also challenge physicians and patients. The aim of the present work was to establish a semi-automated liquid-chromatography tandem mass spectrometry (LC-MS/MS) method for the simultaneous quantification of abemaciclib, its active metabolites abemaciclib M20 and M2, palbociclib, and ribociclib in human serum. Detuning of ribociclib enabled the development of a simultaneous quantification method for abemaciclib, M20, M2, palbociclib, and ribociclib in the respective relevant concentration ranges based on semi-automated sample preparation with isotope dilution LC-MS/MS. The method was validated according to the guidance of the FDA. The LC-MS/MS method was successfully validated according to FDA and showed inaccuracies ≤ 10.7% and imprecisions ≤ 8.51%. Linearity was given from 20 to 800 ng/mL for abemaciclib, 15-600 ng/mL for M20, 10-400 ng/mL for M2 and palbociclib, and 100-4000 ng/mL for ribociclib. Normalized matrix factors and process efficiency showed no significant matrix effects regardless of the analytes. To demonstrate the applicability of the method, authentic samples were also analyzed. This novel semi-automated LC-MS/MS method covering all previously approved CDK4/6 inhibitors as well as the similarly pharmacologically active metabolites in human serum simultaneously was developed for potential future use in routine analysis in order to improve personalized therapy, patient safety, and treatment success.

From research cohorts to the patient - a role for "omics" in diagnostics and laboratory medicine?

Human pathologies are complex and might benefit from a more holistic diagnostic approach than currently practiced. Omics is a concept in biological research that aims to comprehensively characterize and quantify large numbers of biological molecules in complex samples, e.g., proteins (proteomics), low molecular weight molecules (metabolomics), glycans (glycomics) or amphiphilic molecules (lipidomics). Over the past decades, respective unbiased discovery approaches have been intensively applied to investigate functional physiological and pathophysiological relationships in various research study cohorts. In the context of clinical diagnostics, omics approaches seem to have potential in two main areas: (i) biomarker discovery i.e. identification of individual marker analytes for subsequent translation into diagnostics (as classical target analyses with conventional laboratory techniques), and (ii) the readout of complex, higher-dimensional signatures of diagnostic samples, in particular by means of spectrometric techniques in combination with biomathematical approaches of pattern recognition and artificial intelligence for diagnostic classification. Resulting diagnostic methods could potentially represent a disruptive paradigm shift away from current one-dimensional (i.e., single analyte marker based) laboratory diagnostics. The underlying hypothesis of omics approaches for diagnostics is that complex, multigenic pathologies can be more accurately diagnosed via the readout of "omics-type signatures" than with the current one-dimensional single marker diagnostic procedures. While this is indeed promising, one must realize that the clinical translation of high-dimensional analytical procedures into routine diagnostics brings completely new challenges with respect to long-term reproducibility and analytical standardization, data management, and quality assurance. In this article, the conceivable opportunities and challenges of omics-based laboratory diagnostics are discussed.

Report from the HarmoSter study: inter-laboratory comparison of LC-MS/MS measurements of corticosterone, 11-deoxycortisol and cortisone.

OBJECTIVES: Liquid chromatography-tandem mass spectrometry (LC-MS/MS) panels that include glucocorticoid-related steroids are increasingly used to characterize and diagnose adrenal cortical diseases. Limited information is currently available about reproducibility of these measurements among laboratories. The aim of the study was to compare LC-MS/MS measurements of corticosterone, 11-deoxycortisol and cortisone at eight European centers and assess the performance after unification of calibration. METHODS: Seventy-eight patient samples and commercial calibrators were measured twice by laboratory-specific procedures. Results were obtained according to in-house and external calibration. We evaluated intra-laboratory and inter-laboratory imprecision, regression and agreement against performance specifications derived from 11-deoxycortisol biological variation. RESULTS: Intra-laboratory CVs ranged between 3.3 and 7.7%, 3.3 and 11.8% and 2.7 and 12.8% for corticosterone, 11-deoxycortisol and cortisone, with 1, 4 and 3 laboratories often exceeding the maximum allowable imprecision (MAI), respectively. Median inter-laboratory CVs were 10.0, 10.7 and 6.2%, with 38.5, 50.7 and 2.6% cases exceeding the MAI for corticosterone, 11-deoxycortisol and cortisone, respectively. Median laboratory bias vs. all laboratory-medians ranged from -5.6 to 12.3% for corticosterone, -14.6 to 12.4% for 11-deoxycortisol and -4.0 to 6.5% for cortisone, with few cases exceeding the total allowable error. Modest deviations were found in regression equations among most laboratories. External calibration did not improve 11-deoxycortisol and worsened corticosterone and cortisone inter-laboratory comparability. CONCLUSIONS: Method imprecision was variable. Inter-laboratory performance was reasonably good. However, cases with imprecision and total error above the acceptable limits were apparent for corticosterone and 11-deoxycortisol. Variability did not depend on calibration but apparently on imprecision, accuracy and specificity of individual methods. Tools for improving selectivity and accuracy are required to improve harmonization.

Corticotropin-stimulated steroid profiles to predict shock development and mortality in sepsis: From the HYPRESS study.

RATIONALE: Steroid profiles in combination with a corticotropin stimulation test provide information about steroidogenesis and its functional reserves in critically ill patients. OBJECTIVES: We investigated whether steroid profiles before and after corticotropin stimulation can predict the risk of in-hospital death in sepsis. METHODS: An exploratory data analysis of a double blind, randomized trial in sepsis (HYPRESS [HYdrocortisone for PRevention of Septic Shock]) was performed. The trial included adult patients with sepsis who were not in shock and were randomly assigned to placebo or hydrocortisone treatment. Corticotropin tests were performed in patients prior to randomization and in healthy subjects. Cortisol and precursors of glucocorticoids (17-OH-progesterone, 11-desoxycortisol) and mineralocorticoids (11-desoxycorticosterone, corticosterone) were analyzed using the multi-analyte stable isotope dilution method (LC-MS/MS). Measurement results from healthy subjects were used to determine reference ranges, and those from placebo patients to predict in-hospital mortality. MEASUREMENTS AND MAIN RESULTS: Corticotropin tests from 180 patients and 20 volunteers were included. Compared to healthy subjects, patients with sepsis had elevated levels of 11-desoxycorticosterone and 11-desoxycortisol, consistent with activation of both glucocorticoid and mineralocorticoid pathways. After stimulation with corticotropin, the cortisol response was subnormal in 12% and the corticosterone response in 50% of sepsis patients. In placebo patients (n = 90), a corticotropin-stimulated cortisol-to-corticosterone ratio > 32.2 predicted in-hospital mortality (AUC 0.8 CI 0.70-0.88; sensitivity 83%; and specificity 78%). This ratio also predicted risk of shock development and 90-day mortality. CONCLUSIONS: In this exploratory analysis, we found that in sepsis mineralocorticoid steroidogenesis was more frequently impaired than glucocorticoid steroidogenesis. The corticotropin-stimulated cortisol-to-corticosterone ratio predicts the risk of in-hospital death. Trial registration Clinical trial registered with www. CLINICALTRIALS: gov Identifier: NCT00670254. Registered 1 May 2008, https://clinicaltrials.gov/ct2/show/NCT00670254 .

Systematic Evaluation of Voriconazole Pharmacokinetic Models without Pharmacogenetic Information for Bayesian Forecasting in Critically Ill Patients.

Voriconazole (VRC) is used as first line antifungal agent against invasive aspergillosis. Model-based approaches might optimize VRC therapy. This study aimed to investigate the predictive performance of pharmacokinetic models of VRC without pharmacogenetic information for their suitability for model-informed precision dosing. Seven PopPK models were selected from a systematic literature review. A total of 66 measured VRC plasma concentrations from 33 critically ill patients was employed for analysis. The second measurement per patient was used to calculate relative Bias (rBias), mean error (ME), relative root mean squared error (rRMSE) and mean absolute error (MAE) (i) only based on patient characteristics and dosing history (a priori) and (ii) integrating the first measured concentration to predict the second concentration (Bayesian forecasting). The a priori rBias/ME and rRMSE/MAE varied substantially between the models, ranging from -15.4 to 124.6%/-0.70 to 8.01 mg/L and from 89.3 to 139.1%/1.45 to 8.11 mg/L, respectively. The integration of the first TDM sample improved the predictive performance of all models, with the model by Chen (85.0%) showing the best predictive performance (rRMSE: 85.0%; rBias: 4.0%). Our study revealed a certain degree of imprecision for all investigated models, so their sole use is not recommendable. Models with a higher performance would be necessary for clinical use.

[Structure and content of the EU-IVDR : Current status and implications for pathology]. / Struktur und Inhalt der EU-IVDR : Bestandsaufnahme und Implikationen für die Pathologie.

BACKGROUND: Regulation (EU) 2017/746 on in vitro diagnostic medical devices (IVDR) was passed by the European Parliament and the Council of the European Union on 5 April 2017 and came into force on 26 May 2017. A new amending regulation, which introduces a phased implementation of the IVDR with new transitional provisions for certain in vitro diagnostic medical devices and a later date of application of some requirements for in-house devices for healthcare facilities, was adopted on 15 December 2021. The combined use of CE-IVDs, in-house IVDs, and RUO products are a cornerstone of diagnostics in pathology departments and crucial for optimal patient care. The IVDR not only regulates the manufacture and placement on the market of industrially manufactured IVDs, but also imposes conditions on the manufacture and use of IH-IVDs for internal use by healthcare facilities. OBJECTIVES: Our work provides an overview of the background and structure of the IVDR and identifies core areas that need to be interpreted and fleshed out in the context of the legal framework as well as expert knowledge. CONCLUSIONS: The gaps and ambiguities in the IVDR crucially require the expertise of professional societies, alliances, and individual stakeholders to successfully facilitate the implementation and use of the IVDR in pathology departments and to avoid aberrant developments.